Exmark Lazer Z S-Series LZS801CKA72RA1

With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjus...

Overview

With the top-rated Lazer Z S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders and machine health status.

Mower Deck Widths:  52" , 60" and 72"

Specifications

Model
Lazer Z S-Series LZS801CKA72RA1
Year
2022
Sale Type
New
Manufacturer
Exmark
Quantity
0
Manufacturer Qty
0

features

Exmark Lazer Z S Series LZS801CKA72RA1 Doing More With Propane

Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.

Exmark Lazer Z S Series LZS801CKA72RA1 Less Time At The Pump

Gas-powered S-Series models have a single 8-gallon tank with one fill location.

Built to Last Exmark Lazer Z S Series LZS801CKA72RA1

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

Exmark Lazer Z S Series LZS801CKA72RA1 On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Exmark Lazer Z S Series LZS801CKA72RA1 Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Exmark Lazer Z S Series LZS801CKA72RA1 Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Tool-less Belt Removal Exmark Lazer Z S Series LZS801CKA72RA1

Deck and hydro belt can be installed without using any tools.

equipment

UPC
193308119717
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical
12-volt battery with 15-amp alternator.
Drive_Tires
24 x 12.0-12, 4-ply Turf Master®
Parking_Brake
Lever-actuated disc brake.
Tractor_Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade_Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Steering_Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Standard_Features
Engine hour meter and cup holder
Front_Caster_Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.

power components

ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Casters
.50" thick caster yoke arms.
Deck_Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel_Type
Gas Carbureted
Air_Filter
Heavy-duty canister air filtration system
Engine_Brand
Kawasaki
Engine_Model
FX801V
Engine_Speed
3,750 RPM
Engine_Series
V-Twin
Fuel_Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Carb_Compliant
Fuel_Indicator
Yes - electronic Sender
PTO_Engagement
MagStop electromagnetic 200-ft-lb clutch with spot brake
Safety_Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive_Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Drive_Wheel_Release
Allows unit movement without engine running.
Engine_Displacement
852

decks

Blades
3 Blades at 24.50" Length
Deck_Style
Floating Deck
Blade_Tip_Speed
Approximately 18,500 fpm.
Cutting_Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck_Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Width_/_Cutting_Deck
72"
Deck_Style_Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.

dimensions

Width
78.2 in. (198.6 cm)
Height
70.5 in. (179.1 cm)
Length
86.1 in. (218.7 cm)
Curb_Weight
1359

Videos

Location
My Cart - items