Exmark Lazer Z E-Series LZE651CKA484A2

The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, Ult...

Overview

The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.

Mower Deck Widths:  48" , 52" , 60" and 72"

Specifications

Model
Lazer Z E-Series LZE651CKA484A2
Year
2022
Sale Type
New
Manufacturer
Exmark
Quantity
0
Manufacturer Qty
0

features

Exmark Lazer Z E Series LZE651CKA484A2 Hydro Drive, Simplified

Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.

Exmark Lazer Z E Series LZE651CKA484A2 Unibody Frame

Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”

Exmark Lazer Z E Series LZE651CKA484A2 Less Time At The Pump

Gas-powered E-Series models have a single 8-gallon tank with one fill location.

Exmark Lazer Z E Series LZE651CKA484A2 On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Exmark Lazer Z E Series LZE651CKA484A2 Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Exmark Lazer Z E Series LZE651CKA484A2 Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Exmark Lazer Z E Series LZE651CKA484A2 Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Tool-less Belt Removal Exmark Lazer Z E Series LZE651CKA484A2

Deck and hydro belt can be installed without using any tools.

equipment

UPC
193308119724
Seat
Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
Electrical
12-volt battery with 15-amp alternator.
Drive_Tires
23 x 9.50-12, 4 ply Super Turf®
Parking_Brake
Lever-actuated disc brake.
Tractor_Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade_Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Steering_Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Standard_Features
Engine hour meter and cup holder
Front_Caster_Tires
13 x 5.0-6, smooth-tread, semi-pneumatic.

power components

ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
Casters
.50" thick caster yoke arms.
Deck_Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel_Type
Gas Carbureted
Air_Filter
Heavy-duty canister air filtration system
Engine_Brand
Kawasaki
Engine_Model
FX651V
Engine_Speed
3,750 RPM
Engine_Series
V-Twin
Fuel_Capacity
8-gallon (30.3-L) single fuel tank with single fill location.
Carb_Compliant
Fuel_Indicator
Yes - electronic Sender
PTO_Engagement
MagStop Electromagnetic 175 ft-lb clutch with spot brake
Safety_Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive_Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Drive_Wheel_Release
Allows unit movement without engine running.
Engine_Displacement
726

decks

Blades
3 Blades at 16.25" Length
Deck_Style
Floating Deck
Blade_Tip_Speed
Approximately 18,500 fpm.
Cutting_Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck_Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Width_/_Cutting_Deck
48"
Deck_Style_Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.

dimensions

Width
59.6 in. (151.4 cm)
Height
70.5 in. (179.1 cm)
Length
79.2 in. (201.2 cm)
Curb_Weight
1118

Videos

Location
My Cart - items