Exmark Radius S-Series Rear Discharge

The Radius rear discharge zero-turn mower comes with a UltraCut Rear Discharge deck. A 60” cut-width means you can cut more, quickly, while keeping clippings under control. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph fwd. ground speed. The Radius S-Series improves productivity and provides maximum comfort Mower Deck Widths: 60"...

Overview

The Radius rear discharge zero-turn mower comes with a UltraCut Rear Discharge deck. A 60” cut-width means you can cut more, quickly, while keeping clippings under control. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph fwd. ground speed. The Radius S-Series improves productivity and provides maximum comfort

Mower Deck Widths: 60"

Specifications

Model
Radius S-Series Rear Discharge
Year
2022
Sale Type
New
Manufacturer
Exmark
Quantity
0
Manufacturer Qty
0

features

Exmark Radius S Series Rear Discharge Radius Rear Discharge Deck

Available in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.

Exmark Radius S Series Rear Discharge Heavy Duty Unibody Frame

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

Exmark Radius S Series Rear Discharge Quick Adjustable Rollover Protection System (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

Fuel Gauge Window Exmark Radius S Series Rear Discharge

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

Exmark Radius S Series Rear Discharge Height of Cut Made Easy

The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.

power components

ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
Casters
.375" thick caster yoke arms
Deck_Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel_Type
Gas Carbureted
Air_Filter
Cyclonic Air Cleaner
Engine_Spec
_S26
Engine_Brand
Kawasaki
Engine_Model
FX730V
Engine_Speed
3,700 rpm
Engine_Series
V-Twin
Fuel_Capacity
7-gallon (26.5-L) single fuel tank with single fill location.
Carb_Compliant
Fuel_Indicator
Translucent Visual
PTO_Engagement
MagStop electromagnetic 125-ft-lb clutch
Safety_Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive_Description
Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Drive_Wheel_Release
Allows unit movement without engine running.
Engine_Displacement
726

equipment

UPC
193308215778
Seat
Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Electrical
12-volt battery with 15-amp alternator.
Drive_Tires
23 x 10.5-12 Super Turf (142-4266)
Parking_Brake
Lever-actuated pawl brake.
Tractor_Frame
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Blade_Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Steering_Control
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Standard_Features
Engine hour meter, cup holder, tow hitch and jack receiver
Front_Caster_Tires
13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289)

decks

Blades
3 Blades at 20.50" Length
Deck_Style
Floating Deck
Blade_Tip_Speed
Approximately 18,500 fpm.
Cutting_Heights
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Deck_Construction
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Width_/_Cutting_Deck
60"
Deck_Style_Description
Full-floating UltraCut Rear Discharge Deck.

dimensions

Width
66 in (168 cm)
Height
70 in (178 cm)
Length
84 in (213 cm)
Curb_Weight
1044

Videos

Location
My Cart - items